Rode Microphones Wireless GO II Dual Channel Microphone System with Professional Wearable Mic (Pair)

Koah 4.1-inch Triple Shoe Bracket

The Koah 4.1-inch Triple Shoe Bracket easily mounts on a camera's accessory shoe mount, giving you three additional accessory shoe mounts. This is great for mounting, lights, microphones, monitors, and a variety of other accessories. This triple cold shoe bracket easily gives you the ability to do what you can't with a single hot shoe mount on your camera. In addition to the shoe mount, a 1/4-inch-20 thread is also available for attaching the bracket to a tripod, or other bracket featuring a 1/4-inch-20-threaded mount.

4.1-inch-Wide Bracket

This V-Bracket's width spans 4.1-inch and has a tiered design for mounting up to three additional accessories.

Machined Aluminum Alloy

The bracket is machined out of a single piece of aluminum alloy, which provides greater strength to the three shoes

Accessory Shoe and 1/4-inch-20 Socket Mounts

The bracket can attach directly to a camera via the accessory shoe or, additionally, it features a 1/4-inch-20 socket for attaching to threaded mounts such as a tripod.

Locking Pin

The bottom shoe that mounts on to the camera features a locking pin, which prevents the bracket from rotating.

Rode Lavalier GO Professional-Grade Wearable Microphone (Black)

The Rode Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the Rode Wireless GO and most recording devices with a 3.5mm TRS microphone input. Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations. A foam pop shield is supplied to minimize wind noise and vocal plosives, as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing 1.2m (4 feet) long Kevlar reinforced cable, designed to withstand the rigors of any shoot.

Rode Microphones Wireless GO II Dual-Channel Wireless Microphone System

The Wireless GO II Dual-Channel Wireless Microphone System from Rode Microphones comprises a dual-channel receiver with 3.5mm TRS output and two clip-on transmitters (each one with an internal microphone), and USB and TRS cables, furry windshields, and a carry pouch for easy storage. This compact wireless microphone system operates in the 2.4GHz frequency range. The Dual Channel Wireless Microphone System lets you capture two sound sources simultaneously, which is suitable for a wide range of filmmaking scenarios, from recording interviews to two-person vlogs. It can also be used as a single channel wireless microphone for recording just one sound source. The Transmitter (TX) and Receiver (RX) units come with a USB Type-C port that can be utilized for either charging or connecting them to a computer for future firmware updates. When connected to a computer, the receiver can also be used as an interface between the computer and an audio recorder. Wireless GO II is the perfect microphone system for a wide range of content creation applications.

Series IV 2.4GHz Digital Transmission

The system uses Rode’s Series IV 2.4GHz digital transmission with 128-bit encryption, which delivers an extended range of up to 200m (line of sight). For added convenience, it is optimized for operating in areas with a high level of RF activity, including dense urban environments, shopping malls, universities, and offices. The internal antenna ensures an extremely stable connection, and with on-board recording providing a backup of all audio so you don’t have to worry about dropouts while recording.

Seamless Connectivity

Designed to deliver professional sound, the Wireless GO II is incredibly simple to use. The two transmitters come auto paired to the receiver, allowing for a seamless setup process every time. This system uses a 3.5mm analog TRS output for plugging into cameras, plus a digital audio output via USB-C for plugging into smartphones, tablets, and even computers. This universal compatibility with any device expands the Wireless GO II’s versatility.

On-Board Recording

The Rode Wireless GO II Dual-Channel Wireless Microphone System supports onboard recording. It can record over 24 hours of audio directly to each transmitter (without an SD card). This ensures a backup recording is available for post-production when there is any transmission dropout or other audio issues. On-board recording can be activated through Rode Central app. In addition to onboard recording, the system also supports activation of the safety channel (which records a second track at -20dB in case the main channel distorts) and fine gain control that expands the three-stage pad to a 10-stage pad.

In-Built Omnidirectional Condenser Capsule

Each transmitter has a high-quality omnidirectional condenser microphone built into for complete wireless recording, plus a 3.5mm TRS input for plugging in a lavalier microphone, such as the Rode Lavalier GO. This pack comes with three furry windshields that incorporate an innovative twist-to-lock design for recording in windy conditions, ensuring crystal-clear, professional sound in any situation.

Switch Between Mono and Stereo Modes

The Wireless GO II has the ability to switch between mono and stereo modes letting you record each transmitter separately. You can also combine the two modes for ultimate flexibility in post-production. The units feature a mute button and use built-in rechargeable lithium-ion batteries that last up to 7 hours.

Cables

This Wireless GO II bundle ships with a flat TRS memory cable for plugging into cameras and three USB-C to USB-A cables for connecting to computers for charging and recording (additional cables or adaptors are required for connecting to mobile devices and computers with USB-C inputs). There is also a handy carry pouch for keeping the kit tidy and secure.

Ultra-Compact

The Wireless GO II offers the same pocket-sized form factor as the original. The receiver weighs just 32g and each transmitter weighs just 31g, taking up virtually no space in your camera kit bag, backpack, handbag, or briefcase. The transmitters and receiver units are easy to mount onto a DSLR or mirrorless camera, mobile camera set-up, boom pole, or cold shoe accessory.