Studio Monitors

Key features:

• 3.5-inch woven-composite, low-frequency driver
• 1-Inch, ultra-low mass, silk-dome, high-frequency driver
• 50 watt Class AB dual amplification
• 80 Hz to 20 kHz frequency response
• 98 dB SPL (Peak, at 1 meter)
• High- and low-frequency Acoustic Tuning controls
• Balanced, 1/4-inch TRS inputs
• Unbalanced, 1/8-inch stereo and RCA inputs
• Integrated stereo headphone amplifier with front-panel output
• RF interference, output-current limiting, and over-temperature

Key features:

• A-Series Studio Monitor with a low-profile
• Dual 4-inch long-throw woofers and the X-ART tweeter 
• DSP-based tuning capabilities 
• Crossover frequency: 400Hz ? 3.0 kHz
• Larger waveguide
• DSP
• IP networking
• A Control software
• Basic and advanced adaptation filtering
• Automated calibration

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• 3-way speaker delivers accurate and analytical sound
• Designed for small studio spaces
• Crossover frequency of 400 Hz to 3.0 kHz
• Rotatable HPS Waveguide and X-ART Tweeter 
• Larger waveguide
• DSP-based electronics 
• IP networking
• A Control software
• Basic and advanced adaptation filtering
• Great for producing podcasts to mixing string quartets

Key features:

• U-ART 1.9-inch accelerated ribbon tweeter with HPS waveguide
• Polypropylene 7-inch woofer and rear-firing bass-reflex port
• 70W cumulated amplifier power RMS
• 39 Hz - 25 kHz (-6 dB) frequency response
• DSP-powered crossover design
• Spacious rear-firing bass reflex port
• Analog inputs over XLR and RCA

Key features:

• 2-Way bass-reflex bi-amplified nearfield studio monitor
• 6.5-inch cone woofer and 1-inch dome tweeter
• 43Hz - 30kHz frequency response
• 60W LF plus 35W HF bi-amp system for high-performance
• 95W power amplification
• Room control and High Trim response controls
• XLR phone jack inputs for balanced or unbalanced signals

Key features:

• 8-inch composite low-frequency driver
• Bluetooth 5.0 wireless audio stereo input
• 50 watt RMS, Class AB power amplifier
• 30 to 200 Hz frequency response
• Continuously 50 Hz to 130 Hz variable lowpass filter
• 100 dB SPL (Peak, at 1 meter)
• Input gain control -30 to +6 dB, continuously variable
• Highpass filter removes frequency content below 80 Hz
• Balanced 1/4-inch TRS and unbalanced RCA main inputs
• Power saver mode engages after 40 minutes

Key features:

• High-quality compact studio monitors
• Delivers a sonic platform to build on throughout the mixing process
• 60 Hz to 22 kHz frequency response (-10 dB)
• 26 W and 26 W output power
• Room control and high-trim response controls
• XLR/TRS Phone (COMBO), RCA, and Stereo Mini inputs
• Stereo mini - RCA cable, speaker cable, and anti-slip feet included
• Available in white

Key features:

• 2-Way bass-reflex bi-amplified nearfield studio monitor
• 6.5-inch cone woofer and 1-inch dome tweeter
• 43Hz - 30kHz frequency response
• 60W LF plus 35W HF bi-amp system for high-performance
• 95W power amplification
• Room control and High Trim response controls
• XLR phone jack inputs for balanced or unbalanced signals

Key features:

• High-quality compact studio monitors
• Delivers a sonic platform to build on throughout the mixing process
• 60 Hz to 22 kHz frequency response (-10 dB)
• 26 W and 26 W output power
• Room control and high-trim response controls
• XLR/TRS Phone (COMBO), RCA, and Stereo Mini inputs
• Available in black color

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• Accurate, full-bodied sound in a compact form factor
• Designed for small studio spaces
• A frequency range of 41 Hz to 42 kHz
• Great for producing podcasts mixing string quartets
• Rotatable HPS Waveguide and X-ART Tweeter 

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch, ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60 degree EBM waveguide for a wide sweet spot
• 80 watt, Class AB bi-amplification
• 48 Hz to 20 kHz frequency response
• 102 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Internal power supply with IEC connector and power switch
• Balanced XLR and 1/4-inch inputs and unbalanced RCA inputs

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• Bluetooth 5.0 wireless stereo input for mobile devices
• RCA and 1/4-inch balanced​ TRS plus 1/8-inch stereo Aux In
• 100-Watt Class D amplification
• Integrated headphone amplifier with front-panel stereo jack
• 1/4-Inch TRS summed mono subwoofer output

Key features:

• Single point-source coaxial design for wider sweet spot
• 6.5-inch woven composite low-frequency driver
• 1.25-inch, silk-dome, high frequency driver
• 140 watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Wall and ceiling mountable
• 106 dB SPL (Peak, at 1 meter)
• Features acoustic tuning controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature

Key features:

• 10-inch, front-firing, glass-composite, low-frequency transducer
• Front-firing, bass-reflex acoustic port
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Switchable highpass filter removes frequency content below 80 Hz
• Momentary footswitch is included
• Footswitch  bypasses the subwoofer, highpass filter, and Sub Out
  

Key features:

• 3.5-inch woven composite low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• RCA and 1/4-inch balanced ​TRS rear-panel inputs
• Front-panel 1/8-inch stereo Aux In for mobile audio devices
• Integrated headphone amplifier with front-panel stereo jack
• Includes Studio Magic music production software

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• Single point-source coaxial design for the wider sweet spot
• 6.5-inch woven composite low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140 watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Wall and ceiling mountable
• 106 dB SPL (Peak, at 1 meter)
• Features acoustic tuning controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature

Key features:

• Powerful bass subwoofer
• Professional and affordable
• 10-inch glass aramid composite woofer
• 120-watt class-D amplification
• XLR and TRS connection
• Adjustable 40Hz to 180Hz crossover point
• All-wood cabinet design
• Vibration-absorbing rubber feet

Key features:

• 8-inch professional studio monitors
• Logarithmic waveguide design
• Ultra-wide dispersion for enhanced stereo imaging
• 1-inch silk dome tweeter
• 8-inch polypropylene woofer
• 35 Hz to 20 kHz frequency response
• 85 watts of bi-amplified Class A and B amplification

Key features:

• 6.5-inch professional studio monitors
• Logarithmic waveguide design
• Ultra-wide dispersion for enhanced stereo imaging
• 1-inch silk dome tweeter
• 38 Hz to 20 kHz frequency response
• 65 watts of bi-amplified Class A and B amplification

Key features:

• 4.5-inch woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60 degree EBM waveguide for wide sweet spot
• 50 watt Class AB bi-amplification
• 55 Hz to 20 kHz frequency response
• 99 dB SPL (Peak, at 1 meter)
• Tuning controls for accurate mixing contour
• Front-firing port for superior bass-frequency reproduction
• Resonance-suppressing internal bracing
• Balanced XLR and 1/4-inch inputs and unbalanced RCA inputs