PreSonus AIR15 15-Inch 1200W 2-Way Active Loudspeaker with Presonus AIR15s Subwoofer, Sub Pole, and

PreSonus AIR15 15-Inch 1200W 2-Way Active Sound-Reinforcement Loudspeaker with Top-Mounted Handle

Compact and lightweight, the PreSonus AIR15 2-way active PA loudspeaker's 15-inch woofer and 1.35-inch HF driver deliver a rich, extended low-end and natural high-frequency extension in an enclosure that fits in the back of a small car. Backed by 1,200W (peak) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR15 gives you all the power and tools you need for both mobile and installed sound. A choice of inputs enables use with a variety of sources.
Controls
An easy-to-use signal processor with presets makes it simple to customize the AIR15's response for use as front-of-house mains, as monitor wedges, for music playback, for improved speech intelligibility, and enhanced low-end and warmer sound. Treble and bass controls boost or cut by 10 dB to compensate for room anomalies. Location presets optimize performance for stand and bracket mounting as well as flown installations.
Pro Sound
The AIR15's multi-angle enclosure sports non-skid rubber feet on the bottom for upright front-of-house use and on one side for stage monitor applications. Rig it using M10 fly points or ground stack for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional subpole. An integrated dual-position pole mount lets you aim the speaker level or at a 7.5-degree downward tilt. And the AIR15 is easy to transport, thanks to its top-mounted handle. With its pro features and audio quality, the AIR15 is a great choice for mobile and installed sound.
More About the AIR15’s Power Amplifiers
AIR15 loudspeakers provide up to 124 dB SPL of sweet, clear sound throughout the speaker’s 47 Hz to 20 kHz frequency range. A 900W (peak), Class D amplifier powers the 15-inch low-frequency driver for efficient, clean low end. A 300W (peak), Class AB amplifier powers the 1.35-inch HF driver, delivering a natural-sounding, ‘AIR-y’ high end.
Monitor Preset Corrects Excess Bass
If you place a loudspeaker against a wall or floor, the low frequencies emitted from the rear propagate back into the room, increasing bass frequencies by as much as 6 dB. AIR loudspeakers offer a Monitor preset that uses DSP to compensate for bass build-up and maintain a tight mid-bass response while suppressing problem frequencies.
Multiple Inputs for Variety of Sources
AIR full-range loudspeakers feature two combo XLR mic/TRS line inputs, each with a Class A mic preamp and independent gain control. A stereo 1/8-inch connection admits signals from consumer audio devices. These signals can be combined with the internal mixer, and a balanced XLR Mix output lets you pass the signals to other AIR-series loudspeakers.

PreSonus AIR15s 15-Inch 1200W Active Sound-Reinforcement Subwoofer with 2 Ergonomic Side Handles

Designed to complement any full-range PA loudspeaker, and a perfect companion for the PreSonus AIR series, the PreSonus AIR15s Active Subwoofer delivers a powerful, clear, and accurate low-end punch. With its 15-inch low-frequency transducer, driven by 1200 watts (peak) of Class D power, it provides plenty of detailed bottom end, all the way down to 35 Hz.
Design
Despite its power, the AIR15s is portable, compact, and lightweight, with a rugged, tour-grade birch enclosure. It is easy to transport and suitable for mobile applications, as well as installs, with integrated provisions for the included caster kit, ground-stacking provisions, and ergonomic handles on both sides.
Features
AIR-series subwoofers feature easy-to-use controls and signal-processing presets. Set them for normal front-of-house use or boost the low-end with the Mo' Bass preset. Reverse polarity, use the lowpass filter to set a crossover frequency, adjust the power amp's master output level, and even turn the grille LED off for installs-all at the touch of a button. A variable alignment delay properly aligns your three-way system. Most subwoofers are essentially omnidirectional, which can cause feedback onstage and make monitoring difficult. Creating a subwoofer array helps keep excess energy off of the stage and in the audience. AIR-series subwoofers provide the tools you need to create these arrays with ease. Most importantly, the AIR15s sounds great, delivering outstanding low-end clarity and natural music reproduction.
Creating Subwoofer Arrays
Two subwoofers in a traditional stereo configuration can cause a build-up of excess energy onstage. AIR subwoofers’ Cardioid DSP preset makes it easy to create a cardioid array with a more direct radiation pattern, keeping energy offstage and in the audience. Or create an end-fire array for even more off-axis rejection, using the Endfire preset.
AIR15s Inputs, Outputs, and More
The AIR15s sports two combo XLR and 1/4-inch TRS line-level inputs with level control, and throughputs are provided to connect full-range systems or multiple subwoofers in larger systems. You can even defeat the front power-indicator LED for low-visibility installs or set it to illuminate only when the protection limiter is engaged.
System Alignment and Crossover Settings
The AIR15s’ variable alignment delay properly aligns your three-way system, whether the full-range loudspeaker is placed atop the subwoofer, using the sub pole, or is placed a few feet away. A variable lowpass filter enables you to dial in the best crossover point. Optimized settings are provided for AIR-series full-range loudspeakers.

D'Addario 10' CLS 1/4-inch Right Angle Instrument Cable

D'Addario's Classic Series Instrument Cables provide the ultimate in quality and value. These cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. A single-molded strain relief plug provides durability and worry-free reliability. 90% spiral shielding eliminates virtually all handling noise.