EVE Audio SC2070 Active 2-Way Midfield Studio Monitor with 6.5-Inch Woofer and 106 Maximum SPL

The EVE Audio SC2070 Active 2 Way Midfield Monitor boasts an extra-large Air Motion Transformer and sets new standards for detailed sound reproduction. It features a frequency range of 38 Hz to 25 kHz, a 6.5-inch woofer size, and 106 dB maximum sound pressure level. The SC2070 combines the eminent technologies of the SC3070 and the TEC Award-winning SC4070 in a compact 2-way system. The brand-new Air Motion Transformer RS7 represents a new level of innovation. RS7 has been specifically developed for SC2070 to achieve a crossover frequency at 1800Hz that is astonishingly low for a 2-way monitor. The diaphragm area is 1.5 times larger than that of the tweeter's membrane used in SC207. High and upper midrange frequencies are reproduced with unparalleled precision and resolution, revealing the smallest nuances.
More than Just a Speaker
Even if the focus is on the sound the monitor offers a holistic solution that is well thought out from A to Z.
Smart-Knob
Simply set and save filters and volume.
Bass Reflex Design
This allows for precise bass reproduction without background noise.
Parameter Lock
Your settings are saved (even without power).
Safe Fade-In
A slow volume increase when switching on protects ears and equipment.
Engineered To the Detail
An optimized, low-resonance enclosure with a reinforced front baffle houses the Air Motion Transformer RS7 and a 6.5-inch SilverCone woofer, as well as the amplifier unit with a total output power of 250W. Intelligent protection mechanisms prevent the drivers from overload. The beveled cabinet edges reduce sound diffractions. All adjustments can be made via the SMART-knob, which is a trademark of all EVE Audio studio monitors. Thus, a variety of improvements to the respective room situations can be made in the easiest way possible from the front of the studio monitor. On the strength of the combination of these technologies, the SC2070 offers unmatched performance for its compact size with maximum impulse fidelity.
Tech Talk
The Air Motion Transformer RS7, specially developed for SC2070, is the largest AMT used in a 2-way monitor. The diaphragm area is 1.5 times larger than that of AMT RS1, RS2, RS3 and RS3.1 used in the other models and almost as large as in AMT RS6, which is employed exclusively in the main monitors SC3010 and SC3012. With great precision and detail, the RS7 reproduces silky smooth top end down to upper midrange frequencies. With a crossover frequency set to deep 1800Hz, the midrange imaging is assured at levels like those normally found in 3-way systems. The 6.5-inch SilverCone woofer is driven by an advanced, low distortion copper cap magnet system with a 1.5-inch voice coil. The combination of very light and extremely stiff honeycomb cone material enables this woofer to provide a solid base with low distortion and precise and dynamic bass. Two high-quality Class D amplifiers complete the system and provide enough output power to meet the demands of modern music production. The maximum input level can be adjusted between 7dBu and 22dBu to ensure the best possible A and D converter resolution.
The Air Motion Transformer
The tweeters base on the ribbon tweeter technology. The brand EVE Audio reinvented the own version of the AMT which the speakers are well known for.
Understanding the Air Motion Transformer
The Air Motion Transformer (AMT) is a unique driver technology, distinct from other audio drivers. It utilizes a lightweight, hand-folded diaphragm that is thinly coated with aluminum. The current of the music signal flows through these conductive strands. The diaphragm is placed in a powerful magnetic field leading to movement in the folds caused by the Lorenz force. Due to the opposing direction of the current the walls of each single fold work against each other. The air between the folds is squeezed in and out at a ratio of 1:4, compared to the 1:1 ratio of a regular dome tweeter. This results in higher resolution and dynamics in the tweeter section, along with a very low distortion level, allowing superior sound quality with enhanced detail and clarity.
Powering On and Off Standby Mode
Press and hold the control three seconds in order to put the monitor in Standby mode. The volume will decrease gradually while the LED ring lights up once around the Volume control. Afterwards, the LED on the right end will remain dimly lit and the power consumption is reduced to 1 watt.
Volume
The volume can be adjusted by turning the knob. Depending on the LED mode selected, the volume will be displayed as a dim and bright circle or as a dim and bright point.
Mute
To put the monitor in Mute Mode, turn the Volume control counter clockwise until you reach the minimum level. When the LED on the left end lights up dimly the Mute Mode is activated.
Settings
Press the SMART-knob once to enter the Settings menu. Here you can set different filters as well as the LED ring's behavior. The LED of the currently active function blinks.