Electro-Harmonix Pitch Fork Plus Polyphonic Pitch Shifter Pedal with 4-Character Display for Guitar

Dual engine pitch shifting with nearly endless possibilities and expansive control options. The Electro-Harmonix Pitch Fork Plus Pedal features two independent pitch shifting engines with full control over each. Both will transpose your pitch up or down over a plus or minus three octave range and detune plus or minus 99 cents. With rock solid tracking, an organic, musical tone, and extensive control, it’s your ultimate harmonizer. It has dedicated volume controls for both shift voices and the dry signal. It features two outputs, main and Aux, with multiple routing options. There are 10 unique factory presets, plus the ability to easily save and recall 100 programs. A bypass footswitch that toggles between effect on and buffered bypass. In latch mode, it switches between effect and bypass mode. In momentary mode, the effect is on when the FS is held down, and the pedal enters bypass when it’s released. A user footswitch that’s programmable and can be assigned to a variety of functions, such as muting either Shift voice or jumping to a preset program, it features a dedicated LED. An EXP input for EXP or CV control over a broad selection of parameters in three sub-menus: frequency, glissando, and volume. An EXT input for connecting an external foot controller like EHX’s Triple Foot Controller, which enables players to change modes, enter and exit sub-menus, and load presets. Eight modes including X-MOD, which features cross modulation that creates FM and ring mod type effects, and LATCH, which provides enhanced latch and momentary functionality. It comes with an included power adapter.

Ext Jack

TRS input for connecting a generic external foot-controller such as the EHX Triple Foot Controller.

Aux Output Jack

Auxiliary audio output.

Main Output Jack

Main audio output.

Dry Knob

Controls the volume level of the DRY signal.

Shift 1 Knob

Controls the effect volume level of SHIFT 1.

Shift 2 Knob

Controls the effect volume level of SHIFT 2.

Value Knob

Adjust the selected mode parameter, enter sub-menus, or save presets to memory. A press of VALUE enters sub-menus when applicable. Holding VALUE when in PRESET mode saves a preset.

4-Character Display

The 4-character display shows the current parameter value or menu setting for the selected mode. The display shows which option is selected within a mode menu or sub-menu.

Aux

Selects which channel is sent to the AUX output jack. The AUX menu can also select if and how the BYPASS footswitch will affect the AUX output.

SHIFT 1 and SHIFT 2

Select the amount that each shift engine will transpose the input signal. Each SHIFT mode can be set to semitones or octaves covering a total range of plus or minus 3 octaves. Detuning is also possible in either SHIFT mode.

Exp

Sets how the expression pedal or control voltage signal is routed within each of the three sub-menus: FREQ, GLIS, and VOL.

User

The user programmable USER footswitch can be assigned to control different parameters or augment features.

X-Mod

Accesses the cross-modulation amount and SHIFT2 plus DETUNE2 settings.

Preset

Manages loading and saving presets.

Latch

Controls how the BYPASS LATCH footswitch operates. As on the original Pitch Fork, the BYPASS footswitch can be set to either latching or momentary mode.