Electro-Harmonix 22500 Dual Stereo Looper Guitar Pedal with Power Supply, USB Port and Mic Trim Knob

A creative, flexible looper with two independent loops, a comprehensive feature spec and an intuitive user interface like no other. The Electro-Harmonix 22500 Dual Stereo Looper Guitar Pedal has two independent loops that can be played in sequence or in parallel. Flexible performance controls and creative effects allow you to loop in any way you imagine. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time. Creative controls over looping functions such as adjustable tempo, programmable loop or overdub length, and two loops that can playback independently or locked to one another makes the 22500 act like the looper of your dreams.

USB Port

When you connect your 22500 to a computer through the USB connector, it will display the SD card inside the 22500 as a ‘Removable Disk.’ You may then copy files to and from the SD card.

SDHC Memory Card

The 22500 comes supplied with an 8GB card which allows for a total loop recording time of up to 12 hours.

Mic Trim Knob

The MIC TRIM knob allows you to fine tune the gain of the XLR MIC input jack.

Left Input Toggle Switch (Mic or Instrument)

Set left input to the down position for the 1/4-inch instrument input jack or set to the up position for the XLR microphone input.

Phantom Power Toggle Switch (On or Off)

When On position, phantom power is applied to the XLR MIC input jack. Set to the down position to disable phantom power on the microphone input.

Mode Encoder

Push selects mode turn adjusts value.

Input Gain Knob

Sets the overall gain for both the LEFT and RIGHT inputs equally. INPUT GAIN also sets the output level of your dry signal at the output jacks.

FC Jack

Insert a standard, mono 1/4-inch instrument cable into the FC jack and connect the other end of the cable to the optional 22500 Foot Controller. The 22500 Foot Controller can be used to scroll up or down through the 22500's loop banks.

Mono Left Output

The Left output signal is sent through this jack. The dry signal present at the Left input will be output on the MONO or Left Output jack.

Right Output

The Right output signal is sent through this jack. The dry signal present at the Right input jack is output to the R Output jack.

Loop A and B Knobs

Set the output volume for Loop A and B at all times. This knob is always live and does not save with loop banks.

Mic Input

XLR Input Jack for microphones. To use the MIC INPUT, set the LEFT INPUT switch to MIC.

Left Mono Input

1/4-inch Left Instrument or Line Input Jack. Plug the output of your instrument or another effects pedal into this jack. If you use just one input the team recommend you use the Left or MONO input.

Right INPUT

1/4-inch Right Instrument or Line Input Jack. Plug the output of your instrument or another effects pedal into this jack. Use this jack for stereo recording or for recording a second instrument.

Reverse Button

Loop A and Loop B each have a REVERSE button allowing you to enable or disable the Reverse function for each loop independently.