DigiTech DOD Gunslinger Mosfet Aggressive Distortion Pedal with Touch-Sensitive Gain Control

From explosive chord work to high-velocity leads, the DigiTech DOD Gunslinger Mosfet Distortion Pedal has the touch sensitivity, string separation, and saturation to do all your dirty work. The Gunslinger pedal boasts aggressive Mosfet distortion designed to turn your American Twin amp into a fire-breathing dragon from the Isles of Britannia. A gentle mid-range hump helps your leads jump out in a mix, and powerful separate EQ controls for the lows and highs offer plenty of tone sculpting. The Gunslinger can also run at 9v if you need more headroom.
Gain Control
This control is used to adjust the amount of gain being applied to your signal. Turn this clockwise to increase the gain.
Level Control
This control is used to adjust the output level of your signal. Turn this clockwise to increase the output level.
Low Control
This control is used to boost or cut low frequencies. Turn clockwise for bombastic low end, counter-clockwise to clean up any mud, and bring out the mids.
High Control
This control is used to boost or cut high frequencies. Turn clockwise to boost the highs, and counter-clockwise to cut the treble, enhancing the mids.
LED Power Indicator
This lights up when the pedal is on.
Footswitch
Press to turn the effect on or off.
Output Connector
Connect this to the input of your amplifier or your other effects.
Input Connector
Connect your instrument or the output of another effect pedal to this input connector.