PreSonus

Key features:

• 3.5-inch woven-composite, low-frequency driver
• 1-Inch, ultra-low mass, silk-dome, high-frequency driver
• 50 watt Class AB dual amplification
• 80 Hz to 20 kHz frequency response
• 98 dB SPL (Peak, at 1 meter)
• High- and low-frequency Acoustic Tuning controls
• Balanced, 1/4-inch TRS inputs
• Unbalanced, 1/8-inch stereo and RCA inputs
• Integrated stereo headphone amplifier with front-panel output
• RF interference, output-current limiting, and over-temperature

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• 15-inch low-frequency driver with a 3-inch voice coil
• 1200W (peak) Class D power amp
• Max. SPL 126 dB peak with 35 Hz to 160 Hz frequency response
• 2 combo XLR and 1/4-inch line inputs and 2 XLR direct outputs
• Easy-to-use normal and Mo' Bass DSP performance presets
• Locate Normal, Cardioid, and Endfire adjustment presets
• Fully variable lowpass filter
• Alignment delay and polarity switch
• 2 comfortable ergonomic side handles
• Defeatable front-panel LED

Key features:

• 8-inch composite low-frequency driver
• Bluetooth 5.0 wireless audio stereo input
• 50 watt RMS, Class AB power amplifier
• 30 to 200 Hz frequency response
• Continuously 50 Hz to 130 Hz variable lowpass filter
• 100 dB SPL (Peak, at 1 meter)
• Input gain control -30 to +6 dB, continuously variable
• Highpass filter removes frequency content below 80 Hz
• Balanced 1/4-inch TRS and unbalanced RCA main inputs
• Power saver mode engages after 40 minutes

Key features:

• 1-inch high-frequency compression driver
• 10-inch woofer with a 2-inch voice coil
• 900W (peak) Class D power amplifier for LF driver
• 300W (peak) Class A/B amplifier for HF driver
• Max. SPL 121 dB peak with 66 Hz to 20 kHz frequency response
• Onboard mixer with two combos XLR
• 1/4-inch inputs and one summed balanced output
• Easy-to-use DJ, FOH, Monitor, Speech DSP performance presets
• Additional Stand, Bracket, and Suspend presets and control
• 35 mm pole socket with 7.5 degree downward tilt

Key features:

• 8-inch, woven composite, low-frequency transducer
• 1.25-inch ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60-degree EBM waveguide for a wide sweet spot
• 140 watt Class AB biamplification
• 35 Hz to 20 kHz frequency response
• 106 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Front-firing acoustic port for superior bass-frequency
• Features acoustic tuning controls
• RF interference, output-current limiting, and over-temperature

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch, ultra-low-mass, silk-dome, high-frequency transducer
• 120 x 60 degree EBM waveguide for a wide sweet spot
• 80 watt, Class AB bi-amplification
• 48 Hz to 20 kHz frequency response
• 102 dB SPL (Peak, at 1 meter)
• Tuning controls for an accurate mixing contour
• Internal power supply with IEC connector and power switch
• Balanced XLR and 1/4-inch inputs and unbalanced RCA inputs

Key features:

• Single point-source coaxial design
• 8-inch, woven-composite, low-frequency driver
• 1.25-inch, silk-dome, high-frequency driver
• 140-watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Acoustic Tuning Controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature
• Power Saver mode
• Wall and ceiling mountable

Key features:

• 5.25-inch, woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• Bluetooth 5.0 wireless stereo input for mobile devices
• RCA and 1/4-inch balanced​ TRS plus 1/8-inch stereo Aux In
• 100-Watt Class D amplification
• Integrated headphone amplifier with front-panel stereo jack
• 1/4-Inch TRS summed mono subwoofer output

Key features:

• Single point-source coaxial design for wider sweet spot
• 6.5-inch woven composite low-frequency driver
• 1.25-inch, silk-dome, high frequency driver
• 140 watt, Class AB amplification
• 35 Hz to 20 kHz frequency response
• Wall and ceiling mountable
• 106 dB SPL (Peak, at 1 meter)
• Features acoustic tuning controls
• XLR and 1/4-inch TRS balanced and RCA unbalanced stereo inputs
• RF interference, output-current limiting, and over-temperature

Key features:

• 10-inch, front-firing, glass-composite, low-frequency transducer
• Front-firing, bass-reflex acoustic port
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Switchable highpass filter removes frequency content below 80 Hz
• Momentary footswitch is included
• Footswitch  bypasses the subwoofer, highpass filter, and Sub Out
  

Key features:

• 4.5-inch, woven-composite, low-frequency transducer
• 1-inch ultra-low-mass, silk-dome, high-frequency transducer
• Fast, reliable, stereo Bluetooth 5.0 wireless input
• 50W (25W per side) Class AB amplification
• 70 Hz to 20 kHz frequency response
• 100 dB SPL (Peak, at 1 meter)
• RCA and 1/4-inch balanced​ TRS rear-panel inputs
• Front-panel 1/8-inch stereo Aux IN for mobile audio devices
• Headphone amplifier with front-panel stereo 1/8-inch jack
• Fine-tune with high- and low-frequency controls

Key features:

Eris Pro Sub 10 10-Inch Active Front-Firing Low-Frequency Studio Subwoofer with Momentary Footswitch

• 10-inch, front-firing, glass-composite, low-frequency transducer
• Front-firing, bass-reflex acoustic port
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Switchable highpass filter removes frequency content below 80 Hz
• Momentary footswitch is included
• Footswitch  bypasses the subwoofer, highpass filter, and Sub Out
  

Presonus