ADE Advanced Optics Zantitium RD3-015 Pro Series Red Dot with Multi-Reticle System (Black)

ADE is releasing the 2023 Pro Series for ADE Advanced Optics RD3-015 Zantitium red dot called Zantitium Pro D3-015PRO. The additional features that the Pro series includes are Motion Activated System, IP67 waterproofing, and Multi-Reticle Technology.

Motion Activation

The ADE Zantitium Pro D3-015PRO has a Motion Activated System. While Zantitium Pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. The user also has an option to manually turn the red dot power off to disable the Motion Activated System. 

Multi-Reticle

The ADE Zantitium Pro has Multi-Reticle System. The reticle can be switched between a 32 MOA circle with a 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the down switch for 3 seconds to manually turn it on or off. Press and hold the up switch for 3 seconds to change the reticle. Quick press up or down switches to adjust brightness.

Biggest Sight

The ADE Zantitium red dot sight is the biggest handgun sight on the market. It gives up to twice as big a window as other micro red dots. When installed on a micro-compact handgun, it will look bulky. The size of the red dot is about 30 percent longer than other red dots, the window is also bigger. Therefore, it will not fit some optics-ready handgun model that has an optic cut in front of the rear sight which will keep the rear sight to co-witness the red dot, such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to replace the rear sight and set on the top of the slide, not in the pre-cut.

Top Load System

No need to remove the sight to change the battery. Comes with a red dot, a tool, a removable picatinny plate with two screws, a cover, a lens cloth, and an instruction manual. Fits a pistol optic plate to replace the rear sight that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate. It does not fit an optics-ready pistol with a cut. The optics plate for a specific firearm is not included.

Compatibility

RD3-015 Zantitium fit plate that does not fit slide due to larger size, making the sight compatible with Vortex Venom, Burris Fastfire, and Doctor footprint.